Manitou MSI 40 - Clean the Heating Suction Filter

3 - 29
FROM MACHINE N° 142 127
- Remove air filter safety cartridge 1 (Fig. E9/2) and replace the safety
cartridge concerned with a new cartridge.
- Reassemble the entire unit (See chapter : D3 - CHANGE THE DRY AIR
FILTER CARTRIDGE in paragraph : 3 - MAINTENANCE).
E10 - CLEAN THE HEATING SUCTION FILTER
- Lift up the cabin (See chapter : INSTRUMENTS AND CONTROLS in
paragraph : 2 - DESCRIPTION).
- Loosen the knurled nuts 1 (Fig. E10/1) and remove the washers.
- Remove the heating suction filter 2 (Fig. E10/2).
- Clean the filter by means of a compressed air jet.
- Check its condition and change it if necessary.
- Reassemble the whole.
E10/2
E10/1
1
1
2
E9/2
1