Manitou MT 1435 EASY 75D ST3B S1 - Page 115

3 - 19
B9 – CAB VENTILATION FILTERS
CLEAN
EXTERNAL CAB VENTILATION FILTER
- Take out the cab ventilation filter 1.
- Clean the filter with a compressed air jet.
- Check its condition and change if necessary
(see: 3 - MAINTENANCE: FILTERS CARTRIDGES
AND BELTS).
- Reinstall the filter.
- Refit the protective casing 2.
INTERNAL CAB VENTILATION FILTER
- Remove the protective grid 3.
- Lift out cab ventilation filter 4.
- Clean the filter with a compressed air jet.
- Check its condition and change if necessary
(see: 3 - MAINTENANCE: FILTERS CARTRIDGES
AND BELTS).
- Reinstall the filter.
- Refit the protective grid 3.
B10 – CONDENSER CORE (AIR-CONDITIONING OPTION)
CHECK - CLEAN

IMPORTANT

In a polluting atmosphere, clean the radiator core every day.
Do not use a water jet or high-pressure steam as this could damage the condenser fins.
- Visually check whether the condenser is clean and clean it if necessary.
- Clean the condenser using a compressed air jet aimed in the same direction as
the air flow.
- Clean with the fans running for best results.
1
2
3
4
647563 (22/08/2017) MT 1435/1440/1840 EASY 75D ST3B S1