Manitou MT-X 625 2-E3 Series User Manual

2-19
2 - SAFETY BELT
- Sit correctly on the seat.
- Check that seat belt is not twisted.
- Place the seat belt at hip level.
- Attach the seat belt and check that it locks.
- Adjust the seat belt to your body shape without squeezing your hip and without over-slack.
In no event should the lift truck be used if the seat belt is defective (fixing, locking, cuts, tears, etc.). Repair or replace the seat belt immediately.
3 - IGNITION SWITCH
The key switch has five positions:
P - Ignition off, parking position.
O - Ignition switched off and I.C. engine stopped.
I - Ignition on.
II - Heating.
III - The I.C. engine starts, return to position I as soon as the key is released.
4 - EMERGENCY STOP BUTTON
- In the event of danger, it lets you stop the I.C. Engine and thereby cut out all hydraulic
movements.
- Pull the button to disable it before restarting the lift truck.
Be ready for hydraulic movements suddenly stopping when you press this button.
Warning, when driving, the lift truck will be brought to a sudden stop. If possible, stop the lift truck before using
the emergency stop.
5 - BATTERY CUT-OFF
- For quickly disconnecting the battery when working on the electric circuit or when soldering,
for example.
6 - MAN-MACHINE INTERFACE (MMI)
6A - CONTROL PANEL
6B - SCREEN DISPLAY
6A - CONTROL PANEL
A permanently lit or flashing warning lamp, with the engine running, is the sign of an
operating fault. The lighting of some lamps may be accompanied by an audible signal. Do
not ignore this warning, consult your dealer without delay. If one of the warning lamps comes
on while the lift truck is in motion, stop the lift truck under the safest possible conditions.
When activating the electrical system of the lift truck, all the red and orange
lamps and the panel's buzzer must light to indicate their good working order.
If one of the red lamps or the buzzer does not function, carry out the necessary
repairs.
RAZ
h
km/h
km/h
miles
mph
pm
°C
°F
V
%
am
rpm
rpm
miles
mph
647421 (22/08/2017) MT-X 625 Série 2-E3 + COMFORT

Manitou MT-X 625 2-E3 Series Specifications

General

Brand	Manitou
Model	MT-X 625 2-E3 Series
Category	Forklifts
Language	English