6 Installation
Operating and Installation Instructions UL 47
Assembly recommendation
Placing the top unit on top:
1.
Place the four styrofoam blocks (enclosed with the packaging)
on the center adapter.
2.
Move the two units so that they are in position relative to each
other.
Make sure that their doors are closed.
3.
Use four (6.10/10.10) or eight (6.20/10.20) people or suitable
equipment to place the top unit on top of the styrofoam blocks.
Make sure not to damage the drain box, the cover for the
pumps, or the trap elbow.
Caution: Crush hazard!
To Next Page
Loading...
Need help?
General
