Put into operation
1.
Select the 'Combi-steam' cooking program:
Set 150°C and 10 minutes.
2
.
Check the following points:
Is the oven light on?
Is the fan running?
Are there any leaks in the water supply and wastewa‐
ter systems?
Does the temperature rise inside the oven?
3
.
Select the Steam cooking program:
Set 100°C and 10 minutes.
4
.
Check whether steam is being generated in the cooking
chamber
(open appliance door carefully).
5
.
Only for Convotherm 4 injection appliances:
Use the pressure regulator to adjust the pressure to give
the correct reading at the pressure gage in the steam-gen‐
eration water supply:
Table-top units: [kPa] 100 (1 bar)
Floor-standing units: [kPa] 150 (1.5 bar)
6
.
Select ConvoClean / ConvoClean+ fully automatic oven
cleaning:
Select cleaning level 1 and start the cleaning process.
7
.
Check the
ConvoClean / ConvoClean+ fully automatic oven cleaning
system:
Check the supply of ConvoClean forte / new and Con‐
voCare.
Customer guidance and instruction.
Instruct the user regarding all safety-related functions and devices (see '
Checklist: customer guidance
and instruction
on page 182'). Instruct the user in how to operate the appliance.
7 Preparing the appliance for first-time use
Installation manual 105
To Next Page
Loading...
