3.8 Hazards and safety precautions when preparing appliance for use
Safety hazard: electrical power
Danger Where or in what situations does the
hazard arise?
Preventive action
Risk of electric shock
from live parts
Under covers
Under the control panel
Along the mains power lead
Work on the electrical system
must only be performed by quali‐
fied electricians from an author‐
ized service company
Professional working
Before removing the covers:
Switch off all connections to the
power supply
Take protective measures at ev‐
ery power switch to ensure that
the power cannot be switched on
again.
Make sure that the appliance is
de-energized
Ensure that all electrical connections
are in perfect condition and fixed se‐
curely before putting the appliance
into use
On the appliance and on adja‐
cent metal parts
On the appliance and on adja‐
cent metallic accessories
Before preparing the appliance for
use, make sure that the appliance,
including all metallic accessories, is
connected to an equipotential bond‐
ing system.
3 For your safety
Installation manual 32
To Next Page
Loading...
Need help?
General
