11.2 Checklist: Safety devices and warnings
Safety devices
Inspect the following safety devices. Check the box to confirm that the corresponding safety device is
fitted and working properly.
Safety device Fitted / Working
properly
Cover is fitted
Operating panel is fitted
Appliance door has no scratches, cracks or dents
Venting position of appliance door is working
Suction plate in place and properly secured
Magnetic door switch: electric door sensor for appliance door is working
Disconnection device working properly
Gas shut-off device working properly
Retaining device for wheeled stand for restricting the range of movement
Warning signs
Check the warning signs. Check the box to confirm that the warning signs are fitted.
Warning signs on the combi steamer Fitted
Position and description of the warning signs on table-top units
on page 24
Position and description of the warning signs on floor-standing units
on page 26
11 Checklists and completion of installation
Installation manual 181
To Next Page
Loading...
Need help?
General
