3.
Remove all the screws from the slide blocks.
4.
Use at least two people to slide the appliance, on the slide
blocks, down the slides and onto the floor to the installa‐
tion location.
WARNING Risk of crushing from the appliance tipping
over
Before sliding the appliance off the pallet, make sure
that the slides are screwed firmly to the pallet.
Take care not to let an appliance foot slip off the side of
the slide.
Be careful when transferring the appliance from the
slide onto the non-slip floor.
5.
Lift up the combi steamer slightly and remove the slide
blocks.
6.
Remove the protective plastic from the combi steamer.
5 Setting up the appliance
Installation manual 60
To Next Page
Loading...
Need help?
General
