Manitowoc National Crane NBT30H-2 - Lubrication Points

National Crane Published 03-18-2019 Control # 582-04 5-5
NBT30H-2 OPERATOR MANUAL LUBRICATION PROCEDURE AND CHARTS
5
Lubrication Points
Table 5-2:
Item Application
Recommended
Lubricant
Procedure Frequency
1 Hydraulic oil reservoir HYDO
Check and Fill
Change
Check and Fill: Weekly, Fill as
required
Change: Semi-Annually
2 Oil filter, Hydraulic oil reservoir Change or clean
After first 40 Hrs. Quarterly
thereafter
3 Magnetic Plug, Hydraulic oil reservoir Clean At oil filter service interval.
4 Breather, Hydraulic oil reservoir Clean Monthly
5
Sheave pins: boom (5 places),
extension (1), block (1), rooster sheave
(1)
EP-MPG Grease gun Weekly
6 Boom pivot pin EP-MPG Grease gun Monthly
7 Lift cylinder pins - 2 ea. EP-MPG Grease gun Monthly
8 Swing bearing EP-MPG Grease gun Weekly
5
18
15
7
2
4
1
14
10a
10b
14
Oil Fill/Breather
8
13
FIGURE 5-1
19
3
6
12
5
17
Oil Level
16
11
8596-2
22
21