National Crane Published 03-18-2019 Control # 582-04 1-1
NBT30H-2 OPERATOR MANUAL INTRODUCTION
SECTION 1
INTRODUCTION
SECTION CONTENTS
General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
Supplemental Information . . . . . . . . . . . . . . . . . . . 1-2
Notice to Owner/User . . . . . . . . . . . . . . . . . . . . . . 1-2
Basic Nomenclature. . . . . . . . . . . . . . . . . . . . . . . . 1-2
GENERAL
This manual has been compiled to assist you in properly
operating and maintaining your Model NBT30H-2 Series
National Crane (Figure 1-1).
Before placing the crane in service, all operators and
persons working around the crane must thoroughly read and
understand the contents of this manual pertaining to Safety,
Operation and Maintenance. Before moving a vehicle
equipped with the crane, information relating to transporting
the vehicle must be read and observed.
This manual must be retained with the machine for use by
subsequent operating personnel.
Information in this manual does not replace federal, state or
local regulations, safety codes or insurance requirements.
The NBT30H-2 has been designed for maximum
performance with minimum maintenance. With proper care,
years of trouble-free service can be expected.
Constant improvement and engineering progress makes it
necessary that we reserve the right to make specification
and equipment changes without notice.
National Crane and our Distributor Network want to ensure
your satisfaction with our products and customer support.
Your local distributor is the best equipped and most
knowledgeable to assist you for parts, service, and warranty
issues. They have the facilities, parts, factory trained
personnel, and the information to assist you in a timely
manner. We request that you first contact them for
assistance. If you feel you need factory assistance, please
ask the distributor service management to coordinate the
contact on your behalf.
To Next Page
Loading...
Need help?
General
