National Crane Published 03-18-2019 Control # 582-04 3-27
NBT30H-2 OPERATOR MANUAL CONTROLS AND OPERATING PROCEDURES
CRANE REMOTE CONTROL (OPTIONAL)
The optional Crane Remote Control (Figure 3-28) will allow
full remote control of the crane. Refer to the Crane Remote
Control Operator Manual for operating instructions for this
optional remote control.
The Crane Remote Control allows the operator to operate
the following functions:
FIGURE 3-28
5
2
1
4
3
10
6
8
9
7
11
14
13
12
20
19
16
24
22
21
23
25
17
18
15
26
27
7914-3
Item Description
1
Auxiliary Hoist Enable (Disabled is Default)
2 On/Horn Button
3 Advance Rated Capacity Limiter (RCL)
4 Remote Frequency Change
5 Not Used
6 RPM + (Default is RPM -)
7 Turtle Mode (Default is Normal)
8 50% (Default is 100%)
9 RCL Override
10 E-Stop
11 Main Hoist Hi-Speed
12 Auxiliary Hoist Hi-Speed (not used)
13 Engine Start
14 Boom Up
15 Boom Down
16 Main Hoist Up
17 Main Hoist Down
18 Optional A (not used)
19 Optional B (not used)
20 Auxiliary Hoist Up (not used)
21 Auxiliary Hoist Down (not used)
22 Boom Retract
23 Boom Extend
24 Swing Counter Clockwise
25 Swing Clockwise
26 Joystick Lever (6 levers, two position)
27 LCD Screen
Item Description
To Next Page
Loading...
Need help?
General
