Manning YB8 - Clear Menu; Clear Log Data

PROGRAMMING SECTION MODEL YB8
April 1999/Manning Environmental Inc.
3DJH%
The sampler is capable of holding up to 512 events or activities in memory. Once the databank is filled, the
unit will not store any additional information until t he event log is cleared. O nce t he lo g has been cleared t he
information that had been stored there is permanently erased. If the information is critical please review the
DOWNLOAD menu above for information on how to save the logged events and activities in either electronic
format or hard copy.
ENTER MENU SELECTION
__ __ 04:30:02
At this prompt input a 5 and press <ENTER>
CLEAR LOG DATA
NO = 1 YES = 2 04:30:02
This display is shown momentarily to o rient the user to t he upcoming
menu selection.
CLEAR?? NO = 1 YES = 2
04:30:02
Enter your selection at the prompt:
1 This does not clear t he data and will take yo u back to t he
ENTER SELECTION prompt.
2 This will clear all data. I f t here is any data that needs t o be
retained, make sure a backup exists. Once the data has been
deleted it is unrecoverable. After the data is cleared, you will
be taken back to the ENTER SELECTION prompt.
*14 Clear Log Data
* 14 Clear Log Data option allows the operator to clear the logged data without entering the *91 data logging
program. This selection does not give the user the opportunity to back-out of the clearing of the log. This is
an immediate and unalterable erasure. T he *14 clear data unlike the *91 clear data is accessible from the
SAMPLER READY prompt
SAMPLER READY
04/30 04:30:02
This display shows t he sampler is ready t o program. I t displays the
current time. From here the user can enter any TIME, FLOW, or
* Mode. Press the * key to access the * Mode.
ENTER * MODE?
__ __ 04:30:02
Prompts the user to enter either a program or the configuration
function. Press 14 and <ENTER> to erase the logged data.
CLEARING LOG DATA
The menu shows the log being cleared. The log is now clear. The
data that was contained within the log is now erased and is
unrecoverable.
SAMPLER READY
04/30 04:30:02
The unit returns to the SAMPLER READY prompt awaiting further
action.
Clear Menu