Clean around inside of pump to remove particulate
matter which can decrease pump tube life
MAINTENANCE MODEL YB8
April 1999/Manning Environmental Inc.
Page C-2
Inspection Discharge Every Month 3 min Examine the discharge tubing for build up of organic and
Maintenance Tubing particulate matter. If there is build up, follow the same
procedure for cleaning the intake tubing. Replace as necessary.
Inspection Electronics Every Month 2 min Clean as needed with warm water and very mild soap
Maintenance Enclosure
Inspection Keypad Every Month 2 min Clean as needed with warm water and very mild soap. Harsh
Maintenance abrasive cleaning products can damage the keypad and scratch
the clear window to the display
Inspection Sealing Every Year 5 min Unscrew the electronics enclosure from the refrigeration
Maintenance Gasket system and ensure that the gasket is free from debris and is
maintaining its shape and consistency. If the gasket is
exhibiting signs of wear, contact the Manning service
department for information on replacement. Under normal
operating conditions, the gasked should provide many years of
life
Inspection Sample As often as 15 The sample bottles should be checked frequently to ensure that
Maintenance Bottles needed min they are clean. EPA cleaning protocol should be used in the
cleaning of the bottles.
Maintenance Z-Rust Every Year 8 min Once a year, the Z-rust capsule which is used to absorb
Capsule moisture (in the form of humidity) should be replaced
Maintenance Lithium Every 3-5 years 12 The sampler contains an internal lithium battery which should
Battery min be replaced every 3 to 5 years
Peristaltic Pump
The peristaltic pump used in the Manning Environmental Inc. YB8 is designed for long life and trouble free
service. T he following is a list of routine maintenance it ems:
To Next Page
Loading...