MODEL YB8 PROGRAMMING SECTION
April 1999/Manning Environmental Inc.
3DJH%
General Programs
Time Mode - * Start
* START is a unique programming mo de. I t is unlike any o ther mode in that it automatically programs the
unit to take a sample every hour. Simply press the * key and then <START>. As soon as <START> is
pressed, t he sampler begins counting down 1 hour. A t t he end of t hat hour t he sample sequence will be
initiated. T he sampler will advance t he spout, draw 1 sample, and place it in a bottle. The time interval will
reset as soon as t he sample cycle starts. At t he end of the second hour the spout will advance and another
sample will be taken and deposited. T his will continue until t he total number o f bottles t he unit is configured
for (set in *99) each have 1 sample placed in them or a bottle full condition occurs. The sequence will t hen be
finished and the unit will stop o peration waiting for t he same or a new program t o be entered. For example, if
the sampler was configured for 24 bottles, the sampler would place 1 sample in each bottle, over a 24 hour
period for a total of 24 samples, and then stop operation.
Display on LCD Explanation
SAMPLER READY
04/30 04:30:02
This display indicates the sampler is ready t o program and displays
the current t ime. P ress the * key to begin programming.
ENTER * MODE
__ __ 04:30:02
At the ENTER * MODE prompt, press <START> to begin the *
Start Mode.
TIME TO NEXT SAMPLE
01:00 04:30:02
The sampler is automatically programmed and the display will show
the time (in HH:MM format) until t he next sample.
To Next Page
Loading...