PROGRAMMING SECTION MODEL YB8
April 1999/Manning Environmental Inc.
3DJH%
TIME OVERRIDE?
__ __ : __ __ 04:30:02
En
ter in HH:MM fo rmat. R emember to allow enough time for t he
sampler to collect t he required samples.
ENTER DELAY START
__ __ : __ __ 04:30:02
This display prompts the user to enter a delay start time (HH:MM
format). T his is the amount o f t ime the sampler is t o wait before
starting.
ACTIVE PERIOD?
__ __ : __ __ 04:30:02
Enter a time (HH:MM fo rmat). T his is the time window in which
bottle groups are active. It applies to all bottle groups. Make sure it
is lo ng enough t o allow t he sampler to collect the number of samples
required.
# OF BOTTLE GROUPS?
__ __ 04:30:02
Enter a 2-digit number (must be an integer). This is the number of
bottle groups to be created from the number of bottles set in *99.The
number o f bottles will be divided by the number of bottle groups to
determine how many bottles are in a group.
PUSH START/OPTIONS
04:30:02
If no add-on options are desired, press <START> to begin the
program.
DELAY START TIME
__ __:__ __ 04:30:02
This display shows the t ime remaining on the Delay Start.
FLOW MODE (*12)
__ __ __ __ 04:30:02
The sampler is now waiting to receive contact closures and is
independently counting down the interval time.
To Next Page
Loading...