FIRMWARE UPDATE PROCEDURE
1. Items necessary for update
Items necessary for update are as follows.
Update Type Needed Part for Update Requirement
Offered / not Offered
Standard Service Equipment
Not offered by D&M
Purchase from D&M Article code Download from SDI
System u-com Update
RS-232C cable 9P (Male), Straight X - -
8U-210100S WRITING KIT OLD JIG : SPK-581 WRITING KIT - 8U- 210100S -
7P FFC Straight - 606050028012P -
FLASH MCU Programmer - - - pcwfm3-v01l07.zip
Via USB USB Stick (USB 2.0 : Min 1GB) Formatting FAT 32 X - USB_CD6006_XXXX.zip
48
Caution in
servicing
Electrical Mechanical Repair Information Updating
To Next Page
Loading...
