Marantz CD6006 - USB Device Compatibility; Supported File Types

SPECIAL MODE
Special mode setting button
b
No. 1 - 7 : While holding down buttons "
A
" and "
B
" simultaneously, insert the AC plug into the wall outlet to turn on the power.
No. Mode Button A Button B Descriptions
1 Version Display Mode
DISC/INPUT PLAY
The rmware version is shown on the display. Errors that have occurred are displayed.
(See 1. Version Display Mode)
2 FLD check mode
DISC/INPUT STOP
All segments on the FL display ash in a 2 second cycle.
(See 2. Display check mode)
3 Initialization (cold start)
DISC/INPUT PAUSE
Initialize the CD player.
(See 3. Initialization (cold start))
4 CD test mode
8
/
6
PLAY
Initializing CD Player.
(See 4. CD test mode)
5 CD heat Run mode
8
/
6
STOP
Test of CD mech.
(See 5. CD Heat run mode)
6
Accumulated laser on time display
mode
8
/
6
PAUSE
Indicates the accumulated laser on time.
If the CD mechanism has been replaced, reset the laser ON accumulated time using this mode.
(See 6. Accumulated laser on time display mode)
7 Timer check mode
7
/
9
PLAY
Not for service.
8 Over Current display
-
-
If an electric current of over 1A ows in USB-A, then this message will display.
PAUSE
X
DISC/INPUT
PLAYSTOP
7
/
98
/
6
d
40
Caution in
servicing
Electrical Mechanical Repair Information Updating