Marantz NR1403 - Page 34

31
Listening to FM/AM broadcasts
n Changing the tuning mode (Tune Mode)
You can change the mode for tuning into FM/AM broadcasts. If you
cannot tune in automatically with “Auto” mode, then change the
mode to “Manual” and tune in manually.
1
Press FM or AM to switch the input source.
2
Press OPTION.
The option menu screen is displayed.
3
Use ui to select “Tune Mode”,
then press ENTER.
GTV ScreenH
TUNE+/- OPTION
AUTO
CH+/-
TUNER
CH 1
FM 87.50MHz
Tune Preset Option
Direct Tune
Option
Preset Memory
Tune Mode
Auto Preset
Preset Name
Preset Skip
GDisplay of this unitH
Tune Mode
4
Use o p to select tuning mode, then press ENTER.
GTV ScreenH
Auto
Tune Mode
GDisplay of this unitH
Mode :• Auto –
Auto
Automatically tune to the station.
Manual
Manually tune to the station.
5
Press TUNE + or TUNE – to select the station you
want to hear.
The frequency changes in steps each time the button is
pressed.
When tuning in stations manually, press and hold TUNE + or TUNE– to
change frequencies continuously.
n Changing the screen display duration
Make this setting at “Audio Display” (vpage 66) in the menu.
The default setting is “30s”.
Press uio p while the display is off to return to the original
screen.
Operations available through the OPTION button
Press the OPTION button to display a menu of functions that can be
used on the TV screen. Select the function you want to use from this
menu. You can easily find and use the desired function.
n Tuning in by entering the radio frequency (Direct
Tune) (vpage32)
n Presetting the current broadcast station
(Preset Memory) (vpage34)
n Changing the tuning mode (Tune Mode)
(vpage31)
n Tuning in to radio stations and presetting them
automatically (Auto Preset) (vpage33)
n Specify a name for the preset broadcast station
(Preset Name) (vpage35)
n Skipping preset broadcast stations
(Preset Skip) (vpage36)