Marantz PM-10 - Playing Cds; Recording

Playing CDs
This section uses playback from a CD as an example.
1
Press X on this unit to turn the power on.
2
Use INPUT df to switch the input source to
“CD”.
“CD” is displayed on the display of this unit.
3
Playback the CD.
4
Use VOLUME df to adjust the volume.
Recording
Audio signals input into this unit can be output to an external
recording device. When recording audio from a playback
device connected to this unit, audio can be recorded with the
playback device still connected to this unit.
1
Press X on this unit to turn the power on.
2
Press INPUT df to switch to the input source
from which you want to record.
The selected input source is displayed on the display of
this unit.
3
Recording starts.
0
For information on operations, see the owner’s
manual of the recording device.
ENGLISH
19