Marantz PM-10 User Manual

Remote control unit
n
Operating this unit
To operate amplifier, press REMOTE MODE AMP button
to switch the remote control to the amplifier operation
mode.
.
r
o
u
Q0
e
t
q
i
w
y
A
Cursor buttons (uio p)
These select items.
B
DISPLAY button
This turns the display on/off. Press and hold to turn the
illumination lamp on/off.
C
Input source select buttons (INPUT df)
This selects the input source. (v p. 17)
D
Power operation button (X AMP)
This turns the power on/off (standby). (v
p. 17)
E
Remote mode select button (REMOTE MODE AMP)
This switches the remote control to amplifier control mode.
F
ENTER button
This determines the selection.
G
SETUP button
This displays the setting menu on the display.
(v
p. 20)
H
Volume balance adjustment menu button (MODE/
TRIM)
This displays the volume balance adjustment menu on the
display. (v
p. 18)
I
VOLUME buttons (df)
These adjust the volume level. (v p. 17)
J
MUTE button
This mutes the output audio. (v
p. 18)
ENGLISH
6
Overview Connections Playback Settings Tips Appendix

Marantz PM-10 Specifications

General

Type	Integrated Amplifier
Frequency Response	5 Hz - 50 kHz
Total Harmonic Distortion	0.005%
Dimensions	440 x 168 x 453 mm
Weight	21.5 kg
Damping Factor	500
Available Colors	Silver, Black
Power Output	200W per channel (8Ω)
Input Sensitivity	220 mV / 22 kohm