EasyManuals Logo

Marantz PM-11S3 User Manual

Marantz PM-11S3
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #14 background imageLoading...
Page #14 background image
11
Getting started Troubleshooting Specifications IndexAdvanced connections Advanced operation Explanation terms
ENGLISH
Basic operationBasic connections
Basic operation
Before use
Turning the power on
Press X ON/OFF on the unit.
tPower is turned on.
tThe power indicator lights in blue.
tThe unit will be ready to start playback after several seconds.
Turning the power standby
Press X AMP.
tThe power is set to the standby mode.
tThe Standby status indicator lights in
red.
tPress X AMP to turn on power from standby mode.
tYou can also turn on power by using either INPUT SELECTOR
on this unit from standby mode.
NOTE
Power continues to be supplied to some of the circuitry even
when the power is in the standby mode. When leaving home
for long periods of time or when going on vacation, either
press X ON/OFF to turn off the power, or unplug the power
cord from the power outlet.
Starting playback
1
Press SPEAKERS A/SPEAKERS B on the unit to
select the speaker system to be used for playback.
2
Use INPUT SELECTOR on the
unit or
INPUT df on the remote
control to select the source.
tThe input source changes as follows
with each press of the button:
RECORDER1
RECORDER2PHONO
BALANCED
LINE-2LINE-1CD
3
Start playing back the source.
4
Adjust the VOLUME df on the unit or remote
control to the desired level.
Turning the power off
Press X ON/OFF on the unit.
tPower is turned off.
tAll indicators will turn off.

Other manuals for Marantz PM-11S3

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Marantz PM-11S3 and is the answer not in the manual?

Marantz PM-11S3 Specifications

General IconGeneral
Damping factor100
Amplifier class-
Frequency range5 - 100000 Hz
Input sensitivity240 mV
Audio output channels2.0 channels
Peak power per channel200 W
Signal-to-Noise Ratio (SNR)96 dB
Total Harmonic Distortion (THD)0.01 %
Dynamic power per channel (8 Ohm)100 W
XLR inYes
Headphone outputs1
Line inputs (RCA)2
Headphone connectivity6.3 mm
Speakers connectivity typeClamp terminals
MaterialMetal
Cooling typePassive
Product colorBlack, Gold
Volume controlRotary
Connectivity technologyWired
Power consumption (standby)0.3 W
Power consumption (typical)300 W
Weight and Dimensions IconWeight and Dimensions
Depth449 mm
Width440 mm
Height168 mm
Weight27000 g

Related product manuals