6
ENGLISH
NOTE
tDo not plug in the power cord until all connections have been
completed.
tWhen making connections, also refer to the operating
instructions of the other components.
tBe sure to connect the left and right channels properly (left
with left, right with right).
tDo not bundle power cords with connection cables. Doing so
can result in humming or noise.
tDo not turn up the volume without a turntable connected to
the PHONO input terminals. Doing so will cause humming
or noise.
Basic connections
Preparations
Connecting cables
Select the cables according to the equipment being connected.
Audio cables
Analog connections (UNBALANCED)
R
L
R
L
Pin-plug cable (sold separately)
Analog connections (BALANCED)
Balance cables (sold separately)
Speaker connections
Speaker cables (sold separately)
Connecting the audio equipment
Cautions on playing SA sources:
When regular speakers not compatible with SA sources
(DVD Audio discs, Super Audio CDs and other sources,
including treble components above the audible range),
set the properties of the player (DVD Audio player, Super
Audio CD player, etc.) for use with regular speakers (or
amplifiers).The speakers may be damaged if the volume is
set too high when playing SA sources. For instructions on
player settings, refer to the operating instructions included
with the player.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
