Need help?Do you have a question about the Marantz PM6007 and is the answer not in the manual?
General| Frequency Response | 10 Hz - 70 kHz |
|---|---|
| Dimensions | 440 x 105 x 370 mm |
| Weight | 7.8 kg |
| Channels | 2 |
| Damping Factor | 100 |
| Signal to Noise Ratio High level | 102 dB |
| DAC chip | AK4490 |
| Total Harmonic Distortion (20Hz-20kHz, 45W/8Ω) | 0.02% |
| Signal-to-Noise Ratio MM | 83 dB |
| Input Impedance MM | 47 kΩ |
| Power Consumption | 155 W |
| Standby Power Consumption | 0.3 W |
| Dimensions (W x H x D) | 440 x 105 x 370 mm |
| Power Output | 45 W |
| Total Harmonic Distortion | 0.02% |
| Input Sensitivity | 200mV |
| Integrated Amplifier Power Output | 45W per channel (8Ω) |
| Input Sensitivity MM | 2.5mV |
| Signal to Noise Ratio MM/MC | 83 dB (MM) |
| Input Sensitivity High level | 200mV |
| Digital Inputs | 1 Coaxial |
| Phono Input | Yes (MM) |
| Power Output (8Ω, 20Hz-20kHz, 0.02% THD) | 45 W |
| Signal-to-Noise Ratio MC | 64dB |
| Input Impedance MC | 100Ω |
Identifies and labels the controls and indicators on the front of the unit.
Identifies and labels the connectors and controls on the rear of the unit.
Explains how to operate the Marantz amplifier using the remote control.
Provides instructions and guidelines for connecting speakers to the unit.
Guides the user on how to properly connect the power cord to the unit and outlet.
Step-by-step guide to power on the Marantz amplifier.
Instructions for putting the unit into standby mode.
Provides solutions for common problems encountered with the unit.
Solutions for power-related problems, including automatic turn-off.
Addresses issues preventing the remote control from functioning correctly.
Solutions for situations where no sound or no desired sound is produced.
Solutions for sound distortion, noise, and non-illuminating indicators.
To Next Page
