Marantz PM6007 - Selecting the speakers for audio output; Selecting the input source; Adjusting the volume

Selecting the speakers for audio output
1
Use SPEAKERS A/B on the main unit to select the
speaker system to be used for playback.
The indicator of the selected speakers lights.
0
When using headphones, press SPEAKERS A/B to turn off all of the indicators and
turn audio output from the speaker terminals off.
Selecting the input source
1
Press the input source select button to be played back.
The indicator of the selected input source lights in blue.
0
You can also select the input source by turning INPUT SELECTOR on the main
unit.
Adjusting the volume
1
Use VOLUME df to adjust the volume.
0
You can also adjust the master volume by turning VOLUME on the main unit.
Turning off the sound temporarily
(Muting)
1
Press MUTE :.
The indicator of the currently set input source lights in red.
0
To cancel mute, press MUTE : again.
Contents Connections Playback Settings Tips Appendix
27
Front panel Rear panel
Remote control
unit
Index