Marantz PM6007 User Manual

Settings
Setting the Auto Standby mode
32
Setting the remote signal receiving function
33
Disabling the remote signal receiving function of the remote
control unit
33
Enabling the remote signal receiving function of the remote
control unit
33
Setting remote control codes
34
Setting remote control codes for the remote control
35
Setting remote control codes for the main unit
35
Tips
Tips
37
Troubleshooting
38
Power does not turn on / Power is turned off
39
Operations cannot be performed through the remote control unit
40
No sound comes out
41
Desired sound does not come out
41
Sound is interrupted or noise occurs
42
FILTER 1・2 indicator does not light
42
Appendix
D/A converter
43
Explanation of terms
43
Trademark information
44
Specifications
45
Index
48
Contents Connections Playback Settings Tips Appendix
3
Front panel Rear panel
Remote control
unit
Index

Marantz PM6007 Specifications

General

Frequency Response	10 Hz - 70 kHz
Dimensions	440 x 105 x 370 mm
Weight	7.8 kg
Channels	2
Damping Factor	100
Signal to Noise Ratio High level	102 dB
DAC chip	AK4490
Total Harmonic Distortion (20Hz-20kHz, 45W/8Ω)	0.02%
Signal-to-Noise Ratio MM	83 dB
Input Impedance MM	47 kΩ
Power Consumption	155 W
Standby Power Consumption	0.3 W
Dimensions (W x H x D)	440 x 105 x 370 mm
Power Output	45 W
Total Harmonic Distortion	0.02%
Input Sensitivity	200mV
Integrated Amplifier Power Output	45W per channel (8Ω)
Input Sensitivity MM	2.5mV
Signal to Noise Ratio MM/MC	83 dB (MM)
Input Sensitivity High level	200mV
Digital Inputs	1 Coaxial
Phono Input	Yes (MM)
Power Output (8Ω, 20Hz-20kHz, 0.02% THD)	45 W
Signal-to-Noise Ratio MC	64dB
Input Impedance MC	100Ω