Marantz SR5010/U1B - Surround Modes and Parameters

SURROUND MODES AND PARAMETERS
Sound modes and channel output
S
This indicates the audio output channels or surround parameters that can be set.
D
This indicates the audio output channels. The output channels depend on the settings of “Speaker Cong.”.
z
1 A signal for each channel contained in an input signal is output as audio.
z
2 Audio is not output when “Speaker Cong.” - “Surr. Back” in the menu is set to “1 spkr”.
z
3 Audio is output when the set sound mode name contains “+ Dolby Surround”.
z
4 Audio is output when “Subwoofer Mode” in the menu is set to “LFE+Main”.
Sound modes and surround parameters
z
1 -
z
6 : “Sound modes and surround parameters”
Sound mode
Channel output
Front L/R Center Surround L/R
Surround Back
L/R
Front Height
L/R
Top Front L/R Top Middle L/R
Front Dolby
Atmos Enabled
L/R
Surround Dolby
Atmos Enabled
L/R
Subwoofer
Direct/Pure Direct (2-channel)
S Dz4
Direct/Pure Direct (Multi-channel)
SDD Dz1 Dz1 Dz1 Dz1 Dz1 Dz1 D
Stereo
S D
Multi Ch In
SDD Dz1 Dz3 Dz3 Dz3 Dz3 Dz3 D
Dolby Surround
SDD Dz2 DDDDDD
DTS Neural:X
SDDDDDDDDD
Dolby Digital
SDDD Dz3 Dz3 Dz3 Dz3 Dz3 D
Dolby Digital Plus
SDD Dz1 Dz1 Dz3 Dz3 Dz3 Dz3 D
Dolby TrueHD
SDD Dz1 Dz1 Dz3 Dz3 Dz3 Dz3 D
Dolby Atmos
SDDDDDDDDD
DTS Surround
SDDD Dz3 Dz3 Dz3 Dz3 Dz3 D
DTS 96/24
SDDD Dz3 Dz3 Dz3 Dz3 Dz3 D
DTS-HD
SDD Dz1 Dz1 Dz3 Dz3 Dz3 Dz3 D
DTS Express
SDDD Dz3 Dz3 Dz3 Dz3 Dz3 D
DTS:X
SDDDDDDDDD
Multi Ch Stereo
SDDDDDDDDD
Virtual
S D
Sound mode
Surround Parameter
Dialog Level Adjust
Subwoofer Level
Adjust
Cinema EQ
Loudness
Management
z1
Dynamic
Compression
z2
Dialog Control
z3
Low Frequency
z4
Direct/Pure Direct (2-channel) z5 Sz6 S S
Direct/Pure Direct (Multi-channel) z5 SSSSS
Stereo
SSSS
Multi Ch In
SSS S
Dolby Surround
SSSSSS
DTS Neural:X
SSS S S
Dolby Digital
SSSSSS
Dolby Digital Plus
SSSSSS
Dolby TrueHD
SSSSSS
Dolby Atmos
SSSSSS
DTS Surround
SSSSS
DTS 96/24
SSS S
DTS-HD
SSS S
DTS Express
SSS S
DTS:X
SSSSSS
Multi Ch Stereo
SSSSSS
Virtual
SSSS
70