How to resolve no output to Sub Woofer Out on Marantz SR8200 Receiver?
If there's no output to the Sub Woofer Out on your Marantz Receiver, check if “Sub-woofer = NONE” has been selected in SETUP mode. If so, select “Sub-woofer = YES”.
What to do if I cannot get programmed station when the PRESET button is pressed on Marantz Receiver?
If you can't get a programmed station when pressing the PRESET button on your Marantz Receiver, it's possible the preset data has been erased. Disconnecting the power plug for long periods can erase this data. If this happens, input the preset data again.
Why surround mode cannot be changed on Marantz SR8200 Receiver?
If you cannot change the surround mode on your Marantz Receiver, disconnect the headphones. When headphones are connected, Surround mode will be fixed to STEREO.
General| Channels | 7.1 |
|---|---|
| Total Harmonic Distortion (THD) | 0.08% |
| Input Sensitivity | 200 mV |
| Signal-to-Noise Ratio | 100 dB |
| Tuner Section | AM/FM |
| Power Output | 110W per channel (8 ohms, 20Hz-20kHz, 0.05% THD) |
| Frequency Response | 10 Hz - 100 kHz |
| Digital Inputs | 2 x Coaxial, 2 x Optical |
| Digital Outputs | 1 x Optical |
| Surround Sound Formats | Dolby Digital, DTS |
| Video Inputs | 3 x Composite |
| Video Outputs | 2 (composite) |
General safety guidelines and connection advice for operating the equipment.
Guidance on setting up the unit to prevent potential interference or noise.
Information regarding recording and playback consent, citing relevant acts.
Instructions on how to use the user guide, referencing figures and controls.
Details on the power output, discrete stages, and current feedback design of the amplifier.
Overview of supported audio formats like THX, DTS, Dolby Digital, and Pro Logic II.
Describes future-proofing options like RS232 port and multiroom capabilities.
Highlights additional features such as AM/FM tuner and learning remote control.
Steps for inserting AA batteries into the remote control unit.
How to turn on the remote and navigate its interface.
Information on the effective distance and angle for remote operation.
Selecting audio/video sources using the remote control's input buttons.
Adjusting bass and treble levels for desired sound characteristics.
How to choose between various surround sound processing modes.
Basic steps for tuning into radio stations.
Using the automatic tuning function to find stations.
Storing and recalling favorite radio stations using memory slots.
How to view the list of stored radio stations.
Different screens showing unit status, input, and volume on the remote.
Navigating and adjusting system settings through multiple setup pages.
Step-by-step guide to programming remote commands from other devices.
PC specifications needed to use the RC3200edit software.
Instructions for safely cleaning the remote control unit.
Procedure to reset the remote to its default configuration.
Guidance on connecting sources like CD players and tape decks.
Instructions for connecting video sources like TVs and DVD players.
How to connect front, center, surround, and surround back speakers.
Assigning digital input jacks to desired input sources.
Configuring speaker sizes, distances, and levels for optimal sound.
Adjusting surround sound modes, effects, and parameters for immersive audio.
Configuring multi-room audio playback and speaker output settings.
Choosing the desired audio/video source for playback.
How to control the overall sound level.
Choosing the desired surround sound effect.
Fine-tuning audio frequencies.
Enables TV to control receiver power automatically.
Selecting the display mode for the front panel.
Displaying station name or text information from RDS data.
Searching for radio stations based on program type.
Listening to different sources in multiple rooms or zones.
Technical details of the FM tuner's performance and capabilities.
Specifications for power output, frequency response, and sensitivity.
List of items included with the SR8200 unit.
To Next Page
