Remember that the above instructions are just guidelines that apply at most installa-
tions.
Caution: These are TWO separate units. Not one unit that can be wired as llOV OR
220V. Please check the model number on the right side of your unit.
Remember that you should remove the red and blue covers before installing your
unit.
07
Position 1 and 2
Position 1, 2 and 3
Position 1, 2, 3 and 4
POWER SELECTOR MINIMUM BREAKER
20 Amperes
30 Amperes
40 Amperes
WIRING DIAGRAM
INSTALLATION OPTIONS
Amperage control knob
Main water supply valve
Green ground wire
(Connect to ground bar
on breaker box)
Connect both (2) white
wires to breaker.
PP220 (PPXE5) Model:
PP220 (PPXE5)
Connect one (1) white wire to breaker
and one (1) white wire to neutral.
PP110 Model:
PP110
Two or more points of useOne point of use
To Next Page
Loading...
Need help?
General
