Mark-10 TT01 series User Manual

Series TT01 Digital Cap Torque Testers User’s Guide
17
polarity of the signal is positive for clockwise and negative for counter-clockwise.
12.4 DATA Key Settings
To configure the functions of the DATA key, select DATA Key from the menu. The display appears as
follows:
RS232/USB Output
Outputs data via the serial and USB ports
Mitutoyo Output
Outputs data via Mitutoyo (Digimatic) through the serial port
Memory Storage
Stores a reading to memory (refer to the Memory section for details)
Any combination of the above functions may be selected.
DATA KEY
* RS232/USB Output
Mitutoyo Output
Memory Storage

Mark-10 TT01 series Specifications

General

Brand	Mark-10
Model	TT01 series
Category	Test Equipment
Language	English