Marshall Electronics CV610-U3-V2 User Manual

CV610-U3-V2 Manual
www.marshall-usa.com 12
When the camera setting HDMI video format at 1080P50/1080P25/750P50, USB2.0 and USB3.0
resolution with frame rate are available as following list.
HDMI / DVI Video Signal
The camera can simultaneously stream HDMI video output with USB3.0 video output. The DVI port
on the rear panel is not for DVI video output but it is a composite port for multiple use. In order to
use HDMI video output, you need to use the Extension Module.
1. Connect the Extension Module to the camera composite port when the power is off. Turn on the
camera power, after the camera initializes, HDMI video signal can be activated automatically.
2. Connect HDMI cable in between the Extension Module and your HDMI display.
3. You now have HDMI video output.
4. You can use HDMI to DVI converter to obtain DVI video signal.
HDMI FORMAT
USB2.0
Resolution
1920x1080 10P
50P/25P/10P
50P/25P/10P1080P50/1080P25/720P50
25P/10P
1920x1080
1280x720 1280x720
1024x768 1024x768
960x540 960x540
850x480 850x480
800x600 800x600
768x448 768x448
720x576 720x576
720x540 720x540
720x480 720x480
720x404 720x404
640x480 640x480
640x360 640x360
352x288 352x288
USB3.0
Resolution
Frame Rate Frame Rate

Marshall Electronics CV610-U3-V2 Specifications

General

Brand	Marshall Electronics
Model	CV610-U3-V2
Category	Security Camera
Language	English