Marshall Electronics CV610-U3-V2 User Manual

CV610-U3-V2 Manual
www.marshall-usa.com 32
8.4 Storing the Camera Settings in Memory — the Presetting Feature
Memory (Preset)
Using the preset function, 6 sets of camera shooting conditions can be stored and recalled. 6 sets
of camera shooting conditions can be stored and recalled by using remote controller. Up to 128
presets via protocol programming.
This function allows you to achieve the desired status instantly, even without adjusting the following
items each time.
• Pan/Tilt Position
• Zoom Position
• Focus Auto/Manual
• Focus Position
• AE Mode
• Shutter control parameters
• Bright Control
• Iris control parameters
• Gain control parameters
• Exposure Compensation On/Off
• Exposure Level
• Backlight Compensation On/Off
• White Balance Mode
• R/B Gain
• Aperture Control
• WD Parameter
The settings stored using this function are recalled
when the power is turned on.
1. Adjust the position, zooming, focusing and backlighting
of the camera.
2. Position 1-6
While holding down the PRESET button, press any of the POSITION buttons,
1 to 6, in which you want to store the settings.

Marshall Electronics CV610-U3-V2 Specifications

General

Brand	Marshall Electronics
Model	CV610-U3-V2
Category	Security Camera
Language	English