29
8. Operation Using the Infrared Remote Controller
8.1 Pan/Tilt and Zoom Operation
Panning and Tilting
1. Press the POWER switch.
The camera will turn on and perform the pan/tilt reset operation automatically.
2. Press the arrow button to pan or tilt the camera.
While checking the picture on the screen, press the desired arrow button.
To move the camera in short increments, press the button just for a moment.
To move the camera in long increments, press and hold the button.
To move the camera diagonally, press the “ , ” button while
holding down the “ , ” button.
Restore to starting position
Press the HOME button.
If the camera moves in a different direction from the one you intended
The camera is preset so that the image output from the camera is rotated toward the right whenever
you press the “ , ” button.
To face the camera toward the opposite direction
You might wish to face the camera toward the opposite direction from that of the button you
pressed, for example, when you change the direction of the camera while checking the picture on
the screen. In such a case, press the 2 (REV) button while holding down the L/R DIRECTION SET
button.
Arrow button
Movement of the
camera
Setting
While holding down
Press
To Next Page
Loading...
Need help?
General
