7
1. Power
• Power ON/OFF the camera.
• When the camera is powered OFF, the camera
turns to the back and would be on standby mode.
• When the camera is powered ON, the camera
turns to the front.
• Powering the camera ON/OFF would not restart
the camera.
2. Camera ID (Total 3) Selector
3. Preset Position (Total 6) Calling and Setting
4. PAN-TILT
• Pan and Tilt direction control
• HOME: Home position, Resolution reset
5. L/R Direction Set
• Left and right orientation setting
6. ZOOM/FOCUS
• Far
• Near
7. Auto/Manual Focus
8. Back Light
9. Video Format Switching
• You can change the video format by keep pressing
the button. (When video format is changed, the
camera would restart and the screen turns black
for few seconds.)
10. MENU
• On screen menu display ON/OFF
11. Audio Switch
• You can turn the Mic built in the camera Off/ON by pressing the button once.
12. Fast/Slow Zooming Speed Switching
13. White Balance
• Change the White Balance setting by pressing the button.
14. De-Flicker
• When you find the video flicking, press the button once to eliminate the flickers.
4.2 Remote Controller
To Next Page
Loading...
