Marshall Electronics CV610-U3-V2 User Manual

33
Recalling the stored settings
Press any of the POSITION buttons, 1 to 6, in which you have stored the settings.
Cancelling the preset memory
While holding down the RESET button, press the
POSITION button from which you want to cancel the
settings.
• When the power is turned on, the camera starts
with the settings stored in POSITION 1.
• If you want to retain the previous pan and tilt
positions, etc. before the power is turned off and
turned on again, store those positions in POSITION
1.
• When you are storing or cancelling the settings in
one POSITION, you cannot call up, store or cancel
the settings in another POSITION.
• When the menu is displayed on the screen, you
cannot perform the operation for storing, recalling, or cancelling the setting. Be sure to return to
the normal display before starting these operations.
Note

Marshall Electronics CV610-U3-V2 Specifications

General

Brand	Marshall Electronics
Model	CV610-U3-V2
Category	Security Camera
Language	English