Marshall Electronics CV610-U3-V2 User Manual

23
Setting Menu
The setting menu selected on the main menu is
displayed.
1. Setting Menu
The name of the setting menu currently selected is
displayed here.
2. Selected Item
Selects a setting item.
The selected item is shown by the cursor.
Move the cursor up or down by pressing the “ , ” button on the infrared remote controller.
3. Setting Items
The setting items for this setting menu are displayed. Select the setting item using the “ , ” button
on the infrared remote controller.
4. Set Value
The currently set values are displayed.
To change a set value, use the “ , ” button on the infrared remote controller.
In some product models, only use “ ” button on the infrared remote controller to change the value.
To confirm the value, you can use either “ ” button or HOME button.
Control Button
You can select the item by pressing “ , , , ” and HOME button.
1. You can select a menu item by “ , ” button on the infrared remote controller. The selected item is
shown by the cursor (Color change). You can change the value of the item by pressing “ , ” button.
2. You can move to the next layer by pressing the HOME button.
3. You can return to the normal display by pressing the MENU button.
When you are operating the menu using the infrared remote controller, you cannot set IR- RECEIVE
in the SYSTEM menu to OFF. To set IR- RECEIVE to OFF, use the appropriate VISCA command.
Note
Note

Marshall Electronics CV610-U3-V2 Specifications

General

Brand	Marshall Electronics
Model	CV610-U3-V2
Category	Security Camera
Language	English