Marson mt850 - Beeper Indication; Led Indication

MT850 User’s Manual V1.3
8
Industrial 2
of 5, Codabar, MSI, GS1 Databar
2D Symbologies
QR Code, Micro QR Code, Data Matrix,
PDF417, MicroPDF417, Aztec
Regulatory
ESD
Functional after 4KV contact, 8KV air
discharge
EMC/RF
TBA
Safety Approval
TBA
Environmental
WEEE, RoHS 2.0
Medical Compliance
ISO 22196 (JIS Z 2801), ISO 11737-1/2
Beeper Indication
Beeper Status
Single beep
Good read
Single short beep
The scanner reads a Code39 ASCII during
multi-step configuration
Two beeps
Wireless connection
The scanner successfully reads a
configuration barcode
Three beeps
Wireless disconnection
Three short beeps
The scanner reads a barcode while
disconnected
The scanner reads an unexpected barcode
during multi-step configuration. (Please
scan “
Abort
” and start over)
Memory Full
Four beeps (Hi-Lo-Hi-Lo)
Out of range / Poor connection
Five beeps
Low power
LED Indication
LED Status
Off
Power off / Standby / Connected
Flashing blue
Disconnected / Discoverable