CDD USER GUIDE
CDD User Guide V1.0 48
USING ALTERNATIVE CONTROLLERS
Alternative high-quality loudspeaker management systems may be used. The table below lists the parameters for each CDD
Series speaker that need to be entered into the controller for safe and optimised operation. Please note that the data provided
is based on the algorithms used by Martin Audio DX Series Loudspeaker Management Systems; third-party systems are likely to
use different algorithms which may result in both sub-optimal performance and reduce loudspeaker protection.
1 For all models: phase=in; delay=0 ms
2 The figures in this column are based on an amplifier gain of 32 dB. For amplifiers with different gains, please refer to the
loudspeaker data spreadsheet on our website, which will calculate the correct threshold setting for any given gain.
To Next Page
Loading...
Need help?
General
