CDD USER GUIDE
CDD User Guide V1.0 4
APPROVALS
This equipment conforms to the requirements of the EMC Directive 89/336/EEC, amended by 92/31/EEC and 93/68/EEC and the
requirements of the Low Voltage Directive 72/23/EEC, as amended by 93/68/EEC.
EMC Emission: EN55103-1:2009
EMC Immunity: EN55103-2:2009
Safety: IEC60065:2002 + A2:2010
UNPACKING THE UNIT
Thank you for purchasing a Martin Audio CDD Series speaker system. Every Martin Audio loudspeaker is built to the highest
standard and thoroughly inspected before it leaves the factory. After unpacking the system, examine it carefully for any signs of
transit damage and inform your dealer if any is found. It is suggested that you keep the original packaging so that the system can
be repacked at a future date if necessary. Please note that neither Martin Audio nor its distributors can accept any responsibility
for damage to any returned product which arises through the use of non-approved packaging.
Please think of our environment.
When the product has reached the end of its useful life, please dispose of it responsibly through a recycling centre.
To Next Page
Loading...
Need help?
General
