Martin ATOMIC 3000 - Remote Controls; MC-1 Remote Control

Atomic 3000 user manual Remote controls 19
R EMOTE CONTROLS 6
This section describes how to operate the Atomic 3000 with optional Martin
remote controls.
MC-1 REMOTE CONTROL
When connected to the Martin MC-1 remote control, the Atomic 3000 flashes
with fixed rate, duration, and intensity when the Strobe button is pressed on the
MC-1.
Pin 2 on the Mode DIP switch must be OFF. No other DIP switch setting is
necessary.
Connect the Atomic 3000 to the MC-1 as if it were a controller. See “Data
connection” on page 12.