Martin MAC Viper Performance User Manual

Control panel menus 27
PERSONALITY
(continued)
DMX RESET
ON Fixture can be reset via DMX
OFF
Fixture cannot be reset via DMX (can be
overridden: see DMX protocol)
EFFECT
SHORTCUT
ON
Effects take shortest route during
changes, crossing open positions if
necessary
OFF
Effects avoid open positions during effects
changes
AUTO BLACKOUT
OFF
Shutter/dimmer blackout does not call
up other effects.
ON
Iris and gobo wheel are deployed 5
seconds after shutter/dimmer blackout to
eliminate stray light.
DISPLAY
DISPLAY SLEEP
ON Display permanently on
2 MINUTES
Display goes into sleep mode 2 minutes
after last key press
5 MINUTES
Display goes into sleep mode 5 minutes
after last key press
10 MINUTES
Display goes into sleep mode 10 minutes
after last key press
DISPLAY
INTENSITY
10 ... 100 Set display intensity in % (default = 100)
DISPLAY
ROTATION
NORMAL /
ROTATE 180
Display orientation normal or rotated 180°
DISPLAY
CONTRAST
1 ...100 Adjust contrast of display (default = 41)
ERROR MODE
NORMAL
Enable error messages and warnings in
display
SILENT
Disable error messages and warnings in
display (the status LED will still light to
indicate fixture status if an error has been
detected or the fixture has a warning)
FACTORY
DEFAULT
LOAD FACTORY
SETTINGS
ARE YOU SURE?
YES/NO
Return all settings (except calibrations) to
factory defaults
INFORMATION
POWER ON TIME
TOTAL 0 ... XXX HR
Display hours fixture has been powered on
since manufacture (not user-resettable)
RESETTABLE
CLEAR
COUNTER?
YES/NO
Display hours fixture has been powered on
since last counter reset (user-resettable)
LAMP ON TIME
TOTAL 0 ... XXX HR
Display hours of lamp use since
manufacture
(not user-resettable)
RESETTABLE
CLEAR
COUNTER?
YES/NO
Display hours of lamp use since last
counter reset (user-resettable)
LAMP STRIKES
TOTAL 0 ... XXX HR
Display number of times lamp has been
struck since manufacture (not
user-resettable)
RESETTABLE
CLEAR
COUNTER?
YES/NO
Display number of times lamp has been
struck since last counter reset
(user-resettable)
SW VERSION* XX.XX.XX Displays currently active software version
SERIAL
NUMBER*
(XX)XXXXXXXXXXXX Displays fixture’s serial number
RDM UID* 4D50.XXXXXXXX Displays fixture’s unique RDM ID
FAN SPEEDS*
LAMPFAN L ...
BASEFAN 4
0 - XXX RPM
Displays current speed of all cooling fans
(lamp, head and base)
TEMPERA-
TURES*
ZOOM/FOCUS ...
BALLAST
X C
Displays temperature in °C of all PCBs and
of ballast capacitor
Menu level 1 Menu level 2 Menu level 3 Menu level 4 Notes (Default settings in bold print)
Table 2: Control menus

Martin MAC Viper Performance Specifications

General

Brand	Martin
Model	MAC Viper Performance
Category	Lighting Equipment
Language	English