© 2012 Martin Professional A/S. Information subject to change without notice. Martin Professional A/S and all affiliated companies
disclaim liability for any injury, damage, direct or indirect loss, consequential or economic loss or any other loss occasioned by the
use of, inability to use or reliance on the information contained in this document. The Martin logo, the Martin name and all other trade-
marks in this document pertaining to services or products by Martin Professional A/S or its affiliates and subsidiaries are trademarks
owned or licensed by Martin Professional A/S or its affiliates or subsidiaries.
P/N 35000259, Rev. E
User Documentation update information
Any important changes in the MAC Viper Profile User Guide are listed below.
Revision E
Covers firmware version 1.3.0. Adds explanation of beam smoothing, description of service mode, lists of warning
and error messages, details of calibration via DMX. Aerial and breakup wheel gobo indexing control values
changed (default = 50% = 0°), Auto blackout setting via DMX added to ch. 26/29. Errors in Brick it and Big bones
gobo P/Ns corrected.
Revision D
Covers firmware version 1.1.0. Control of breakup and aerial wheels in fixtures running firmware 1.1.0 now matches
the User Guide.
Revision C
First version released. Covers firmware version 1.0.0 but in fixtures running this version, breakup and aerial wheel
control via DMX and in the control menu are in reverse order compared to the User Guide. Firmware update
recommended.
To Next Page
Loading...
Need help?
General
