Need help?Do you have a question about the Martin MAC 2000 Profile II and is the answer not in the manual?
General| Brand | Martin |
|---|---|
| Model | MAC 2000 Profile II |
| Category | Lighting Equipment |
| Language | English |
Crucial safety guidelines for professional use, covering electrical, UV, burn, and fall hazards.
Step-by-step guide for safely replacing the fixture's lamp, including essential precautions.
Instructions for configuring power supply settings, especially for magnetic ballast models.
Critical steps for connecting the fixture to the AC power supply, including plug requirements.
Best practices for connecting multiple fixtures using DMX data cables for reliable transmission.
Detailed instructions for securely attaching the fixture to a truss using clamp brackets.
Setting the fixture's DMX address and choosing between 8-bit or 16-bit DMX modes.
Understanding and interpreting service messages that indicate fixture issues or required maintenance.
Utilities to fine-tune optical alignment and ensure uniform performance between fixtures.
Detailed steps for calibrating zoom, pan, tilt, dimmer, colors, and focus for optimal performance.
General advice on cleaning optical components and the fixture body carefully.
Detailed steps for cleaning lenses, filters, and other optical surfaces without damage.
Requirements and procedures for updating the fixture's firmware.
Control functions for shutter, strobe, reset, and lamp on/off via DMX.
DMX channel dedicated to controlling the overall fixture intensity.
DMX control for CMY color mixing and color temperature correction.
DMX control for color/gobo wheel selection, scrolling, and rotation.
DMX control for Gobo Wheel 1 indexed rotation, shake, and fine position settings.
DMX control for Gobo Wheel 1 coarse and fine position/velocity adjustments.
DMX control for Gobo Wheel 2 indexed rotation, shake, and fine position settings.
DMX control for selecting effects, controlling rotation, and using macros.
DMX control for adjusting the position and velocity of the effect wheel.
DMX control for the iris aperture, including pulse effects.
DMX channel for adjusting the beam focus from near to infinity.
DMX channel for controlling the beam angle, from flood to spot.
DMX control for coarse and fine adjustments of pan and tilt movement.
DMX control for pan/tilt and effect speed, including tracking mode parameters.
Setting the starting DMX channel for fixture communication.
Selecting the DMX protocol mode for finer control or reduced channel usage.
DMX control for Cyan, Magenta, Yellow color mixing and Color Temperature Correction.
DMX control for selecting color wheel positions and managing continuous rotation.
DMX control for Gobo Wheel 1's indexed gobos, rotating gobos, and shake effects.
DMX control for Gobo Wheel 2's indexed gobos, rotating gobos, and shake effects.
DMX control for the effect wheel's indexed rotation, continuous rotation, frost, and no rotation.
Accessing the submenu for making manual mechanical adjustments to the fixture.
Accessing calibration, fan control, PCB testing, and software update modes.
Steps to diagnose and resolve issues when the fixture is completely unresponsive.
Diagnosing and fixing erratic behavior or lack of response to controller commands.
Diagnosing and resolving issues related to the lamp not lighting or displaying a 'LERR' message.
Identifying causes and solutions for the lamp intermittently turning off during operation.
Specifications for maximum power consumption and current draw under various operating conditions.
To Next Page