Martin Wheeler - User Manual

8 pages

Save Page as PDF

To Next Page

To Next Page

Loading...

Wheeler

user manual

P/N 35000068

www.audiovias.com

Table of Contents

Questions and Answers

S
Sarah WoodsJul 29, 2025
What to do if my Martin Lighting Equipment has no light?
- V
  victoriaewingJul 29, 2025
  If your Martin Lighting Equipment has no light, there are several potential causes. First, check the connections to ensure the fixture is receiving power. If the connections are good, inspect the fuse and replace it if it's blown. A burned-out lamp could also be the culprit, so try installing a new lamp. Finally, if the fixture is too hot, allow it to cool and improve airflow around it.
T
Travis WatsonAug 12, 2025
What to do if my Martin Lighting Equipment has no action?
- K
  Katie MolinaAug 12, 2025
  If your Martin Lighting Equipment shows no action, it could be due to a couple of reasons. It's possible that the sound is too low to activate the control circuit. Try increasing the volume or moving the speakers closer. If that doesn't work, it may be an electrical malfunction, in which case you should refer to a service technician.

Summary

Safety Information

Electric Shock Safety

Guidance on preventing electric shock, including grounding and power source requirements.

Burn and Fire Safety

Precautions against burns and fire, including clearance distances and fuse handling.

Fall Injury Prevention

Safety measures for preventing falls during installation and operation, including structural support checks.

Lamp Installation

Cord Cap and Fixture Installation

Installation Procedure

Steps for installing the fixture using a mounting bracket or rigging clamp and safety cable.

Operation Modes

Lamp On Mode

Description of the 'lamp on' mode where the lamp stays on and drum rotation is sound activated.

Flash Mode

Description of the 'flash' mode where lamp and rotation are sound activated.

Maintenance and Troubleshooting

Fuse Replacement

Instructions for safely replacing a blown fuse with one of the correct rating.

Troubleshooting Guide

Common problems, their probable causes, and suggested remedies for the fixture.

Specifications

Summary

Safety Information

Electric Shock Safety

Guidance on preventing electric shock, including grounding and power source requirements.

Burn and Fire Safety

Precautions against burns and fire, including clearance distances and fuse handling.

Fall Injury Prevention

Safety measures for preventing falls during installation and operation, including structural support checks.

Lamp Installation

Cord Cap and Fixture Installation

Installation Procedure

Steps for installing the fixture using a mounting bracket or rigging clamp and safety cable.

Operation Modes

Lamp On Mode

Description of the 'lamp on' mode where the lamp stays on and drum rotation is sound activated.

Flash Mode

Description of the 'flash' mode where lamp and rotation are sound activated.

Maintenance and Troubleshooting

Fuse Replacement

Instructions for safely replacing a blown fuse with one of the correct rating.

Troubleshooting Guide

Common problems, their probable causes, and suggested remedies for the fixture.

Specifications

Martin Wheeler Specifications

General

Brand	Martin
Model	Wheeler
Category	Lighting Equipment
Language	English

Related product manuals

Preview: Martin MAC 700 WASH

Martin MAC 700 WASH

Preview: Martin MAC 250 Wash

Martin MAC 250 Wash

Preview: Martin MiniMAC Wash

Martin MiniMAC Wash

Preview: Martin MAC Quantum Wash

Martin MAC Quantum Wash

Preview: Martin RUSH MH 6 Wash CT

Martin RUSH MH 6 Wash CT

Preview: Martin MAC Aura

Martin MAC Aura

Preview: Martin RoboScan 812

Martin RoboScan 812

Preview: Martin Mania SCX500

Martin Mania SCX500

Martin MAC 700 PROFILE

Martin MAC Viper Profile

Martin MAC 2000 Profile II

Preview: Martin MAC Viper Performance

Martin MAC Viper Performance