Ignition switch
FIG. 1
There are four positions as follows
OFF Position
All circuits are isolated and the key can be removed.
ON Position
All igniting circuits are ON and the engine can be started. The key cannot
be removed in this position.
Lock the handlebar Position
In order to lock the handlebar, turn the bar to the left, then insert the
key. Rotate it clockwise to full stop to lock the steering.
Night Parking position.
To park the motorcycle at night turn the key to ā ā position. In this
position, the key can be removed and the tail lamp and front side lamps
stay ON for parking on the roadside at night.
To Next Page
Loading...
