Mash Seventy Five - Rear Shock Damper; Spring Adjustment

21
Rear shock damper
Spring adjustment
The shock damper springs of rear wheel can be adjusted according to the
payload, driving mode and road conditions. The adjustment can be one of five
stages. Park the vehicle on its central stand or side stand and turn the spring
tension ring to the required position. The first stage is the softest and the fifth
stage is the hardest. The second stage is as the factory setting.
Warning
If you park the vehicle on sloped ground, please point it uphill and
engage 1
st
gear.
Make sure that stands up before setting off on your bike!
The springs of both sides must be at the same stage. Otherwise, it may
cause an instability and poor handling