Chapter 7
Essentials of Driving
Before driving, make sure that the side stand is returned to the up position.
Do not make gear shifting or deceleration in course of turning. Slow down to a
safe speed before turning.
Do not shift into a low gear during turning.
It is dangerous to drive a motorcycle single handed. During driving, take a firm
hold of the handlebars with both hands and put your feet on the foot pegs.
On a wet road, the friction force is low and so is the brake force and turning
capability. Therefore, decelerate in advance.
Observe the traffic laws and speed limit.
Engine starting
Make sure the fuel switch is in open position and the engine shutdown switch in
“ ”position. Insert the ignition key in ignition switch and turn it to ON position.
If the transmission is in neutral position, the neutral indicator lamp is lit.
Press the electric starting button to start the engine. Never rotate the
accelerator grip when pressing the starting button.
If it is the first time for you to drive this type of motorcycle, you are advised
to practice on a road away from highways, until you have completely become
familiar with the controls and operation of the vehicle.
Make it a habit to engage the neutral gear and firmly press the clutch lever
before starting the engine.
To Next Page
Loading...
