Check the condition of the brake pads regularly. The thickness must be greater
than 2 mm. If the thickness is less than 2 mm, the brake pads must be replaced.
Regularly degrease the rear brake disc (5) to ensure optimum braking
performance at all times.
In the event of a brake fluid leak, contact your MASH dealer.
In the event of a braking problem, contact your Mash dealer.
Brake Fluid Type : DOT4
Rear brake light switch
Rear brake light switch is located at the right side of chassis. Adjust the rear
brake light switch as follows: Lift or lower the switch, so that, when the brake
pedal is pressed, the lamp is lit before feeling a pressure.
To Next Page
Loading...
