1.
Fuel
Chapter 4
Recommendations for fuel and oil
Note :
If the engine produces a distinct ping noise ( callind ‘pinking’), it may be caused
by using of improper fuel. Check you are using the correct fuel.
Do not use fuel SP95 E10.
Lubricant
(Please refer to Regular Maintenance Table)
Use high quality 4-stroke engine oil to prolong engine life. Engine oil should
be SE or SD product in API classification. Engine oil of proper viscosity should
be used according to local air temperature. There are three viscosity levels
suitable for the engine, namely, SAE15W-40, SAE10W-30 and SAE5W-30.
Refer to the figure on the next page:
Gasoline is inflammable and explosive. When handling gasoline, attention
should be paid to prevent accidents.
●
In places where gasoline is stored or handled, switch off the engine, do
not smoke, and keep fuels away from naked flames or sparks.
Refueling shall be made in a well ventilated place. After refueling,
immediately clean off any gasoline from the surface of the fuel tank.
Use unleaded gasoline 95 (or 98)
To Next Page
Loading...
