Masimo EMMA - High Etco2 Alarm

www.masimo.com 33 Masimo
High EtCO2 Alarm
1. Press and hold the Alarm Silence button until the display shows the Hi ETCO2 Screen and the EtCO
2
display shows the current high EtCO
2
alarm limit. See Controls on page 29.
2. Release the Alarm Silence button.
3. To adjust the alarm limit: press the Alarm Silence button (▲) to increase, or the Power On button (▼) to
decrease the value. It is possible to switch off the high EtCO
2
alarm by adjusting the limit above 99
mmHg (9.9 kPa). The EMMA Capnograph will indicate this setting by showing "- -" on the EtCO
2
display
during the adjustment routine.
If no button has been activated for a short period of time, the EMMA Capnograph will automatically
resume normal operation.