What to do if the LEGI indicator is steady red on Masimo Medical Equipment?
A steady red LEGI indicator on your Masimo Medical Equipment suggests a couple of potential problems. Initially, try power cycling the device by disconnecting and reconnecting the NomoLine ISA device connector at the host device. If the red light persists after power cycling, the NomoLine ISA device may require service.
Why is the LEGI indicator blinking red on my Masimo NomoLine ISA CO2?
A blinking red LEGI indicator on your Masimo Medical Equipment often indicates a problem with the sampling line. Inspect the sampling line for any occlusion, such as a blockage or kink. If no occlusion is found, replace the sampling line.
Why are gas readings questionable on my Masimo NomoLine ISA CO2 Medical Equipment?
Questionable gas readings on your Masimo Medical Equipment can stem from several issues. First, ensure you're using the correct sampling line. If the correct line is in use, try disconnecting and reconnecting it to the device. Also, check the sampling line for any leaks. If the issue persists, the NomoLine ISA device may require service.
How to fix NomoLine ISA values not displayed on Masimo NomoLine ISA CO2?
If the NomoLine ISA values aren't showing up on the host monitor, there are a couple of things to check. First, try power cycling the NomoLine ISA device by disconnecting and then reconnecting the device connector at the host. If that doesn't work, verify that the host device is correctly configured and compatible with the NomoLine ISA device.
What to do if LEGI indicator is dark on Masimo NomoLine ISA CO2 Medical Equipment?
If the LEGI indicator is dark (off), start by checking the connection of the NomoLine ISA device to the host monitor. Make sure it's securely plugged in. Next, verify that the sampling line is completely plugged into the NomoLine ISA device; disconnect and reconnect it to ensure a good connection. If the indicator remains dark, the NomoLine ISA device may require service.
What to do if gas readings are questionable on Masimo Measuring Instruments?
If the gas readings from your Masimo Measuring Instruments NomoLine ISA CO2 seem questionable, first ensure you are using the correct sampling line. Next, disconnect and reconnect the sampling line to the NomoLine ISA CO2. Check the sampling line for any leaks. If the problem persists, the NomoLine ISA CO2 may require service.
What to do if LEGI indicator is steady red on Masimo Measuring Instruments?
If the LEGI indicator on your Masimo Measuring Instruments NomoLine ISA CO2 is steady red, try disconnecting and reconnecting the NomoLine ISA CO2 connector at the host device. If the issue continues, the NomoLine ISA CO2 may require service.
What to do if LEGI indicator is blinking red on Masimo Measuring Instruments?
If the LEGI indicator on your Masimo Measuring Instruments NomoLine ISA CO2 is blinking red, inspect the sampling line for any occlusion, such as blockages or kinks. If no occlusion is found, replace the sampling line.
Why is the LEGI indicator dark on Masimo Measuring Instruments?
If the LEGI indicator on your Masimo Measuring Instruments NomoLine ISA CO2 is dark, first verify that the NomoLine ISA CO2 is properly plugged into the host monitor connector. Next, ensure the sampling line is completely plugged into the NomoLine ISA CO2. If the problem persists, the NomoLine ISA CO2 may require service.
General| Brand | Masimo |
|---|---|
| Model | NomoLine ISA CO2 |
| Category | Medical Equipment |
| Language | English |
To Next Page
